Dynagard 25 Series Single Point Fixed O2 Monitoring System

Home / Shop / Dynagard 25 Series Single Point Fixed O2 Monitoring System

Dynagard 25 Series Single Point Fixed O2 Monitoring System

Fixed, stand-along System

The Dynagard 25 Series O2 is a single-point fixed O2 monitoring system to measure oxygen levels accurately. The ZD 21 zirconia sensor technology in the Dynagard 25 Series O2 has an impressive response to an oxygen deficiency in less than two seconds.

GET A QUOTE on this product

PRODUCT INFORMATION:

PRODUCT SPECIFICATIONS
PRODUCT FEATURES
LITERATURE & DOWNLOADS

SPECIFICATIONS

Detector	Oxygen (O2)
Detector Range	0 to 25% Volume
Detection Principle	Zirconia oxide
Gas Supply	Diffision
Humidity	0 to 99% r.h. non-considering
Pressure	920 to 1,100 hPA
Temprature	32 to +122°F / 0 to +55°C

Local display
Horn/Stobe
Linear 4-20 mA output
Each alarm point and can be adjusted separately
The controller provides four voltage-free relays for the three alarms and one fault warning

Dynagard_25_O2_Data_Sheet_Hi

SPECIFICATIONS

Detector	Oxygen (O2)
Detector Range	0 to 25% Volume
Detection Principle	Zirconia oxide
Gas Supply	Diffision
Humidity	0 to 99% r.h. non-considering
Pressure	920 to 1,100 hPA
Temprature	32 to +122°F / 0 to +55°C

FEATURED PRODUCTS

DH4-27SD

Designed to meet the most stringent requirements, we offer quality refrigerators to store critical research material, clinical samples, and vaccines in a controlled environment ranging from 2°C to 8°C.

KRYO 750 Control Rate Freezer

Sophisticated temperature control and simple operation – the Kryo750 is perfect for ensuring viable preservation of high-volume valuable biological cells and tissues.

MVE Cryosystem Series

The MVE Cryo System Series combines the benefits of low nitrogen consumption with mid-range vial capacity to meet the diverse needs of today’s professionals worldwide.

MVE Heco Series

These high-efficiency, eco-friendly freezers (HEco) incorporate hinged work surfaces that fully enclose all electronics and plumbing to enhance overall safety and usability. As with all MVE’s cryogenic freezers, the MVE HEco Series freezers provide maximum storage density and the longest hold time, and the highest sample security in the industry.

RELATED PRODUCTS

Dynamic Climate Chamber MKF Series

For rapid temperature changes with humidity control

A BINDER MKF series environmental simulation chamber is ideally suited for any cold and heat testing based on current temperature and climate testing methods according to DIN and IEC standards. The comprehensive standard equipment for this environmental simulation chamber ensures ease of operation. Temperature range from -40 °C to +180 °C and humidity range: 10 % to 98 % RH.

MKF 720 – Capacity 25.9 cu.ft. I 734 L

MKF 240 – Capacity 8 cu.ft. I 228 L

MKF 115 – Capacity 4.1 cu.ft. I 115 L

MKF 56 – Capacity 2.1 cu.ft. I 60 L

Price: Contact Pacific Science, LLC

Constant Climate Chamber KMF Series

with expanded temperature and humidity range

Fully compliant with ICH guidelines and offering the best solution for stability testing. Binder Series KMF temperature and humidity chamber ideal for complex stress tests under conditions at 85°C and 85% RH.

KMF 720 – Capacity 24.7 cu.ft. I 700 L

KMF 240 – Capacity 8.7 cu.ft. I 247 L

KMF 115 – Capacity 3.6 cu.ft. I 102 L

Price: Contact Pacific Science, LLC

Dynamic Climate Chamber MK Series

For rapid temperature changes

The BINDER MK series chamber is suitable for all heat and cold tests between -40 °C and 180 °C. The MK is a clever alternative to complex individual solutions for cyclical temperature tests.

MK 720 – Capacity 25.9 cu.ft. I 734 L

MK 240 – Capacity 8 cu.ft. I 228 L

MK 115 – Capacity 4.1 cu.ft. I 115 L

MK 56 – Capacity 2.11 cu.ft. I 60 L

Price: Contact Pacific Science, LLC

Constant Climate Chamber KBF-S Series

with large temperature/humidity range

Configurable, constant climate chambers with a large temperature and humidity range for reliable stability testing and precise maintenance of constant climate conditions. The KBF-S series is a custom-made solution for long-term testing and accelerated stability testing of pharmaceutical products in accordance with the ICH A1A guidelines.

Dynagard 25 Series Single Point Fixed O2 Monitoring System

PRODUCT INFORMATION:

FEATURED PRODUCTS

RELATED PRODUCTS

For rapid temperature changes with humidity control

MKF 720 – Capacity 25.9 cu.ft. I 734 L

MKF 240 – Capacity 8 cu.ft. I 228 L

MKF 115 – Capacity 4.1 cu.ft. I 115 L

MKF 56 – Capacity 2.1 cu.ft. I 60 L

with expanded temperature and humidity range

KMF 720 – Capacity 24.7 cu.ft. I 700 L

KMF 240 – Capacity 8.7 cu.ft. I 247 L

KMF 115 – Capacity 3.6 cu.ft. I 102 L

For rapid temperature changes

MK 720 – Capacity 25.9 cu.ft. I 734 L

MK 240 – Capacity 8 cu.ft. I 228 L

MK 115 – Capacity 4.1 cu.ft. I 115 L

MK 56 – Capacity 2.11 cu.ft. I 60 L

with large temperature/humidity range

KBF-S 1020 – Capacity 36 cu.ft. I 1020 L

KBF-S 720 – Capacity 24.7 cu.ft. I 700 L

KBF-S 240 – Capacity 8.7 cu.ft. I 247 L

KBF-S 115 – Capacity 3.6 cu.ft. I 102 L

Talk to Someone Today Lorem Ipsum Dolor Sit

Contact us

Contact us

Get a Quote